how to fix P0302 misfire code on Ford Explorer Fifth Generation (2011-2019)?

Ford Explorer Fifth Generation (2011-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: P0302

3 min read

557 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0302 cylinder 2 misfire in Ford Explorer (2011-2019). Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

P0302

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components.
•Allow the engine to cool down before starting repairs.
•Be cautious of fuel spillage when working with fuel injectors.

Symptoms

•Check engine light illuminated
•Rough idle
•Decreased power during acceleration
•Poor fuel economy
•Engine stalling

Diagnostic Steps

1
Scan the vehicle with an OBD-II scanner to confirm the P0302 code and check for any other related codes.
2
Inspect the ignition coil and spark plug in cylinder 2 for visible damage or wear.
3
Test the ignition coil for proper operation using a multimeter.
4
Check fuel injector operation by listening for clicking sounds or using a noid light.
5
Perform a compression test on cylinder 2 to check for mechanical issues.
6
Inspect the wiring and connectors for the ignition coil and fuel injector for any signs of damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Spark plug socket
•Fuel injector removal tool
•Multimeter

Parts Required

•Spark plug
•Ignition coil
•Fuel injector

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle with an OBD-II scanner to confirm the P0302 code and check for any other related codes.
2
Inspect the ignition coil and spark plug in cylinder 2 for visible damage or wear.
3
Test the ignition coil for proper operation using a multimeter.
4
Check fuel injector operation by listening for clicking sounds or using a noid light.
5
Perform a compression test on cylinder 2 to check for mechanical issues.
6
Inspect the wiring and connectors for the ignition coil and fuel injector for any signs of damage.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the negative battery terminal to avoid electrical shock.
Allow the engine to cool down before proceeding.

2. Replace Spark Plug

Tools Required: Socket set, torque wrench, spark plug socket.
Remove the ignition coil cover if applicable.
Remove the ignition coil for cylinder 2 (unplug the connector, unbolt the coil).
Remove the old spark plug using a spark plug socket.
Inspect the spark plug for wear (replace if damaged).
Install the new spark plug, torque to manufacturer specifications (typically 13-15 lb-ft).

3. Replace Ignition Coil

Tools Required: Socket set, torque wrench.
If the ignition coil is faulty, install the new ignition coil in cylinder 2.
Secure it with bolts and connect the electrical connector.
Ensure all connections are tight and secure.

4. Check/Replace Fuel Injector

Tools Required: Fuel injector removal tool (if necessary), pliers.
Disconnect the fuel injector electrical connector and fuel line (be cautious of fuel spillage).
Remove the fuel injector from cylinder 2 and inspect it for clogs or damage.
If faulty, install the new fuel injector, ensuring proper seating and connection.

5. Reassemble and Test

Reinstall any components that were removed during the process.
Reconnect the negative battery terminal.
Start the engine and let it idle to check for smooth operation.