FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I fix the problem of my Chevrolet Silverado 1500 T1XX not starting? - Chevrolet Silverado 1500
Home/Cars/Chevrolet/Silverado 1500/T1XX (2019-2023)/How do I fix the problem of my Chevrolet Silverado 1500 T1XX not starting?

How do I fix the problem of my Chevrolet Silverado 1500 T1XX not starting?

Chevrolet Silverado 1500 T1XX (2019-2023)

Error Codes
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
5 min read
831 words

Problem Statement

Learn how to diagnose and repair a non-starting Chevrolet Silverado 1500 T1XX (2019-2023) with detailed steps and required tools.

Affected Component
Starting System

Symptoms

  • •Engine Cranks but Does Not Start
  • •No Crank Condition
  • •Electrical Issues
  • •Security Light

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •OBD-II Scanner
  • •Basic Hand Tools (screwdrivers, wrenches)
  • •Battery Tester
  • •Fuel Pressure Gauge
  • •Jumper Cables
  • •Torque Wrench
  • •Safety Glasses and Gloves

Additional Information

Affected Component
Starting System
Difficulty
medium
Severity
medium
Tools Required
8 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Troubleshooting and Repairing a Non-Starting Chevrolet Silverado 1500 T1XX (2019-2023)

If your Chevrolet Silverado 1500 T1XX is not starting, it could be due to several reasons ranging from a dead battery to issues with the fuel system or ignition. Below are detailed steps to diagnose and potentially fix the issue.

Tools Required
  • Multimeter
  • OBD-II Scanner
  • Basic Hand Tools (screwdrivers, wrenches)
  • Battery Tester
  • Fuel Pressure Gauge
  • Jumper Cables
  • Torque Wrench
  • Safety Glasses and Gloves
Step 1: Check Battery Health

  1. Visual Inspection:

    • Inspect battery terminals for corrosion or loose connections.
    • Ensure the battery is properly secured.

  2. Test Battery Voltage:

    • Use a multimeter to check the voltage; it should read around 12.6 volts for a fully charged battery.
    • If the voltage is below 12.4 volts, charge the battery and retest.

  3. Load Test:

    • If you have access to a battery tester, perform a load test to confirm the battery's health.
Step 2: Inspect the Fuses

  1. Locate the Fuse Box:

    • Refer to the owner’s manual for the location of the fuse box (usually under the dash or hood).

  2. Check Relevant Fuses:

    • Look for fuses related to the ignition system, fuel pump, and starter. Replace any blown fuses.
Step 3: Test the Starter and Ignition System

  1. Check Starter Connections:

    • Inspect the starter connection for tightness and corrosion.
    • Use a multimeter to check for voltage at the starter when the key is turned to the "Start" position.

  2. Bypass the Ignition:

    • Using jumper cables, connect the battery directly to the starter’s solenoid terminal to see if it cranks. If it does, the starter is functional, and the issue may lie in the ignition switch or wiring.
Step 4: Check Fuel System

  1. Listen for Fuel Pump:

    • Turn the key to the "On" position (not start) and listen for the fuel pump priming (a faint whirring sound).

  2. Check Fuel Pressure:

    • Use a fuel pressure gauge connected to the Schrader valve on the fuel rail. The specified fuel pressure is typically around 55-62 psi (check the specific model requirements).
    • If pressure is low, check for a clogged fuel filter or faulty fuel pump.
Step 5: Scan for Diagnostic Trouble Codes (DTCs)

  1. Connect OBD-II Scanner:

    • Plug in the OBD-II scanner to the diagnostic port under the dashboard.

  2. Read Codes:

    • Follow the scanner instructions to read any trouble codes. Pay attention to codes related to P0606, P0335, or any immobilizer codes.
    • Address any codes by following manufacturer repair guidelines.
Step 6: Inspect the Ignition System
  1. Check Spark:
    • Remove one of the spark plugs and connect it to the ignition coil. Ground the plug against the engine block and have someone crank the engine. You should see a blue spark.
    • If there is no spark, check the ignition coils and wiring.
Step 7: Check the Security System

  1. Check for Security Light:

    • If the security light is flashing or on, it may indicate an issue with the key or immobilizer.

  2. Reprogram Key:

    • If you have a spare key, try using that to start the vehicle. If successful, the original key may need to be reprogrammed.
Repair Instructions
If Battery is Dead or Faulty
  1. Replace or Recharge Battery:
    • If the battery is faulty, replace it with one of the same specifications.
    • Clean the terminals and check connections before reinstalling.
If Starter is Faulty
  1. Replace Starter:
    • Remove the starter by unbolting it from the engine block.
    • Install the new starter and ensure all connections are secure.
If Fuel System is Faulty
  1. Replace Fuel Pump or Filter:
    • If the fuel pump is faulty, replace it by accessing it through the fuel tank. Ensure the lines are properly connected and free of leaks.
    • If the fuel filter is clogged, replace it as per the manufacturer’s recommendations.
If Ignition System is Faulty
  1. Replace Ignition Coils or Wires:
    • If coils are faulty, replace them and ensure the spark plugs are in good condition.
If Security System is Malfunctioning
  1. Reprogram or Replace Key:
    • Follow the manufacturer’s instructions for key reprogramming using the OBD-II scanner or visit a dealership for a new key.
Conclusion

After completing the above steps, attempt to start the vehicle. If the Silverado still does not start, you may need to consult with a professional technician or a Chevrolet dealership for further diagnosis and repair.