how to fix the remote start issue on my BMW X5 G05 (2019-2024)

BMW X5 G05 (2019-2024)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

535 words

Problem Statement

The remote start feature on a 2019-2024 BMW X5 G05 is not functioning, preventing the vehicle from starting remotely via the key fob or mobile app.

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components to avoid shock or short circuits.

Symptoms

•Remote start button on the key fob is unresponsive
•Error message displayed on the vehicle's infotainment system
•Engine does not start when attempting to use remote start
•No sound or notifications when trying to initiate remote start
•Other remote functions (lock/unlock) work normally

Diagnostic Steps

1
Verify that the vehicle is in an appropriate state for remote starting (e.g., doors closed, hood closed).
2
Check the battery level of the key fob and replace if necessary.
3
Scan the vehicle's onboard computer for error codes using an OBD-II scanner.
4
Inspect the remote start settings in the vehicle's infotainment system to ensure it is enabled.
5
Test the remote start feature using the mobile app to rule out key fob issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Use the screwdriver to carefully pry open the key fob.
•Replace the old battery with the new one, ensuring correct polarity (+/-).
•Reassemble the key fob.

Parts Required

•Key fob battery (CR2032 or as applicable)
•Wiring harness (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Verify that the vehicle is in an appropriate state for remote starting (e.g., doors closed, hood closed).
2
Check the battery level of the key fob and replace if necessary.
3
Scan the vehicle's onboard computer for error codes using an OBD-II scanner.
4
Inspect the remote start settings in the vehicle's infotainment system to ensure it is enabled.
5
Test the remote start feature using the mobile app to rule out key fob issues.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked in a well-ventilated area.
Disconnect the vehicle battery before starting repairs.

2. Check and Replace Key Fob Battery

Tools Required: Small flathead screwdriver, replacement key fob battery (CR2032 or as applicable).
Use the screwdriver to carefully pry open the key fob.
Replace the old battery with the new one, ensuring correct polarity (+/-).
Reassemble the key fob.

3. Reset Remote Start Feature

Tools Required: OBD-II scanner.
Connect the OBD-II scanner to the vehicle’s diagnostic port.
Access the remote start settings in the vehicle’s computer system.
Reset or re-enable the remote start feature as needed.
Disconnect the scanner and reconnect the vehicle battery.

4. Inspect Wiring and Connections

Tools Required: Multimeter, screwdriver set.
Inspect the wiring harness connected to the remote start system for any visible damage or loose connections.
Use a multimeter to check for continuity in wiring, ensuring that all connections are secure.
Repair or replace any damaged wiring as necessary.

5. Test Remote Start Functionality

Reconnect the vehicle battery and ensure all systems are operational.
Attempt to use the remote start feature from the key fob and the mobile app.
Verify if the engine starts as expected.