FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my BMW X3 F25 (2011-2018) has no power to the mirrors, how do I fix it? - BMW X3
Home/Cars/BMW/X3/F25 (2011-2018)/my BMW X3 F25 (2011-2018) has no power to the mirrors, how do I fix it?

my BMW X3 F25 (2011-2018) has no power to the mirrors, how do I fix it?

BMW X3 F25 (2011-2018)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
496 words

Problem Statement

The BMW X3 F25 (2011-2018) is experiencing a loss of power to the side mirrors, preventing them from adjusting or folding.

Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems to avoid shocks or shorts.

Symptoms

  • •Side mirrors are unresponsive to adjustment controls
  • •No power to the mirror heating function (if equipped)
  • •No audible sound from mirror motor when attempting to adjust
  • •Potential warning message on the dashboard indicating mirror malfunction

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Fuse puller or needle-nose pliers
  • •Flathead screwdriver
  • •Torx screwdriver
  • •Wire strippers

Parts Required

  • •Replacement mirror adjustment switch (if faulty)
  • •Replacement fuses (if blown)

Additional Information

Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the negative battery terminal to ensure safety.
2. Check and Replace Fuse
  • Tools Required: Fuse puller or needle-nose pliers.
  • Locate the fuse box (usually under the dashboard on the driver's side or in the engine compartment).
  • Identify the fuse for the mirror controls using the fuse diagram.
  • Remove the fuse and inspect for a blown element.
  • If blown, replace with a fuse of the same amperage (usually 10A or 15A).
3. Inspect and Repair Wiring
  • Tools Required: Multimeter, wire strippers, electrical tape.
  • Visually inspect the wiring harness leading to the mirrors for any damage or disconnections.
  • If any wires appear damaged, cut away the damaged section and splice in new wire using solder or appropriate connectors.
  • Insulate repair with electrical tape to prevent short circuits.
4. Replace Mirror Adjustment Switch (if necessary)
  • Tools Required: Flathead screwdriver, Torx screwdriver.
  • Remove the door panel (if required) to access the back of the mirror adjustment switch.
  • Disconnect the wiring harness from the switch.
  • Install the new switch by connecting the wiring harness and securing it in place.
  • Reassemble the door panel carefully.
5. Final Check
  • Reconnect the negative battery terminal.
  • Test the mirror adjustment controls to ensure functionality.