how to reset the tire pressure light in BMW 5 Series G30/G31 (2017-2024)?

BMW 5 Series G30/G31 (2017-2024)

Error Codes

15-30 minutes

Time

medium

Difficulty

medium

Severity

2 min read

397 words

Problem Statement

The tire pressure warning light is illuminated in a BMW 5 Series G30/G31 (2017-2024), indicating that the tire pressure monitoring system (TPMS) has detected an issue with tire pr

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always check tire pressures when the tires are cold for accurate readings.

Symptoms

•Tire pressure warning light illuminated on the dashboard
•Possible fluctuation in tire pressure readings
•Warning message displayed on the instrument cluster
•Reduced tire performance or handling
•Increased fuel consumption (if tires are under-inflated)

Diagnostic Steps

1
Verify that all tires, including the spare, are inflated to the recommended pressure levels.
2
Inspect tires for any visible damage or punctures that might affect pressure.
3
Check the vehicle’s owner manual for the specific procedure to reset the TPMS.
4
Use an OBD-II scanner to check for any TPMS-related error codes.
5
Confirm that the vehicle is in a stationary position and the ignition is in the "On" position.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner (if checking for errors)

Parts Required

•TPMS sensors (if replacements are needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Verify that all tires, including the spare, are inflated to the recommended pressure levels.
2
Inspect tires for any visible damage or punctures that might affect pressure.
3
Check the vehicle’s owner manual for the specific procedure to reset the TPMS.
4
Use an OBD-II scanner to check for any TPMS-related error codes.
5
Confirm that the vehicle is in a stationary position and the ignition is in the "On" position.

Solution

1. Preparation

Ensure that all tires are inflated to the recommended PSI as per the label found on the driver's door jamb.
Have the vehicle in a stationary position with the ignition in the "On" position (engine can be off).

2. Access the TPMS System

Press the "Menu" button on the iDrive controller.
Navigate to "Vehicle Info" and select "Tire Pressure Monitor."

3. Reset the TPMS

Select the "Reset" or "Reinitialize" option from the Tire Pressure Monitor menu.
Confirm the reset by selecting "Yes" when prompted on the screen.

4. Completion

Turn the ignition off and then start the engine.
Verify that the tire pressure warning light has turned off after a few seconds.