how to reset the service light on my BMW 5 Series G30/G31 (2017-2024)

BMW 5 Series G30/G31 (2017-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

382 words

Problem Statement

The service light on a 2017-2024 BMW 5 Series G30/G31 needs to be reset following maintenance or servicing.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in park before performing the reset.

Symptoms

•Service light remains illuminated on the dashboard
•Maintenance reminder notification appears
•Engine oil service indicator shows due

Diagnostic Steps

1
Turn the ignition to the "ON" position without starting the engine.
2
Press the accelerator pedal three times within 10 seconds to access the service menu.
3
Navigate to the "Vehicle Info" using the iDrive controller.
4
Select "Vehicle Status" and then "Service Required".
5
Choose the service that needs resetting (e.g., Engine Oil, Brake Fluid).
6
Confirm the reset option when prompted.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•BMW key fob (for vehicle access)

Parts Required

•No parts are required for resetting the service light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition to the "ON" position without starting the engine.
2
Press the accelerator pedal three times within 10 seconds to access the service menu.
3
Navigate to the "Vehicle Info" using the iDrive controller.
4
Select "Vehicle Status" and then "Service Required".
5
Choose the service that needs resetting (e.g., Engine Oil, Brake Fluid).
6
Confirm the reset option when prompted.

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface.
Sit in the driver's seat and close all doors.
Have the key fob handy.

Insert the key fob into the ignition slot or keep it within the vehicle.
Turn the ignition to the "ON" position (do not start the engine).
Wait for the dashboard lights to illuminate.

3. Navigating the iDrive System

Use the iDrive controller to navigate to the "Vehicle Info" option on the main screen.
Select "Vehicle Status" from the menu.
Scroll down to "Service Required" and select it.

4. Resetting the Service Light

Highlight the specific service item you want to reset (e.g., Engine Oil, Brake Fluid).
Select the reset option.
Confirm the reset by selecting "Yes" when prompted on the screen.
Exit the menu and turn off the ignition.