how to reset the service light in my BMW 5 Series G30/G31 (2017-2024)?

BMW 5 Series G30/G31 (2017-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

3 min read

402 words

Problem Statement

The service light on a BMW 5 Series G30/G31 (2017-2024) needs to be reset after a maintenance service has been performed.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in park before performing these steps.

Symptoms

•Service light illuminated on the dashboard
•Maintenance reminder notifications displayed
•No other symptoms present, as the issue pertains strictly to the service light reset

Diagnostic Steps

1
Insert the key fob into the ignition without starting the engine.
2
Press the start/stop button without pressing the brake pedal to turn on the electronics.
3
Use the onboard computer to navigate to the “Vehicle Info” or “Settings” menu.
4
Scroll down to “Service Required” or “Service History.”
5
Select the option for resetting the service light or service interval.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob

Parts Required

•None required for the reset procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Insert the key fob into the ignition without starting the engine.
2
Press the start/stop button without pressing the brake pedal to turn on the electronics.
3
Use the onboard computer to navigate to the “Vehicle Info” or “Settings” menu.
4
Scroll down to “Service Required” or “Service History.”
5
Select the option for resetting the service light or service interval.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Gather the key fob.

With the key fob in the ignition slot, press the start/stop button to activate the electrical systems.
Wait for the dashboard to light up, indicating the systems are powered.

Using the iDrive controller (the rotary knob located on the center console), navigate to “My Vehicle.”
Select “Vehicle Status” from the menu.
Go to “Service Required” to view the current service intervals.

4. Resetting the Service Light

Once in the “Service Required” section, find the specific service that needs resetting.
Highlight the service interval and press the iDrive controller to select it.
Choose the option to reset the service light, typically indicated as “Reset” or “Confirm Reset.”
Confirm the reset when prompted.

5. Finalizing

Exit the menu and turn off the ignition.
Restart the vehicle to confirm the service light is no longer illuminated.