how to reset the oil change light on my BMW 5 Series G30/G31 (2017-2024)

BMW 5 Series G30/G31 (2017-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

376 words

Problem Statement

The oil change light on a 2017-2024 BMW 5 Series G30/G31 needs to be reset after an oil change to ensure accurate maintenance reminders.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in "Park" mode and on a flat surface to prevent unintended movement.

Symptoms

•Oil change light illuminated on the dashboard
•Notification of oil service due soon or overdue
•No response from the oil change light after performing an oil change

Diagnostic Steps

1
Turn on the vehicle's ignition without starting the engine.
2
Navigate to the "Settings" menu on the iDrive system.
3
Select "Vehicle Info" from the options.
4
Choose "Service Required" to access the service menu.
5
Verify that the oil change light is currently activated.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for resetting the oil change light

Parts Required

•None required for resetting the oil change light

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Close all doors and ensure the ignition is off.

2. Access the iDrive System

Turn the ignition to the "On" position (do not start the engine).
Press the "Menu" button on the iDrive controller to access the main menu.

3. Navigate to Service Reset

Select "Vehicle Info" using the iDrive controller.
Scroll down to "Service Required" and select it.
Locate "Engine Oil" service option.

4. Reset the Oil Change Light

Highlight the "Engine Oil" option.
Press and hold the iDrive controller until the reset option appears.
Confirm the reset by selecting "Yes" when prompted.

5. Verify the Reset

Exit the menu and turn off the ignition.
Restart the vehicle to ensure the oil change light does not illuminate.