how to reset the oil change light on my BMW 5 Series G30/G31 (2017-2024)?

BMW 5 Series G30/G31 (2017-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

372 words

Problem Statement

The oil change light on a 2017-2024 BMW 5 Series (G30/G31) needs to be reset after an oil change.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and secured before performing the reset procedure.

Symptoms

•Oil change light illuminated on the dashboard
•Maintenance reminder showing on the display
•No other performance issues related to the oil change light

Diagnostic Steps

1
Ensure the vehicle is in a stationary position and the ignition is off.
2
Insert the key fob into the ignition or press the start button without pressing the brake pedal to enter the "On" position.
3
Access the vehicle's onboard computer system using the iDrive controller.
4
Navigate to the "Vehicle Information" or "Service" menu.
5
Select "Oil Change" or "Service Required" options.
6
Confirm the reset action when prompted.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob

Parts Required

•No parts are required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in a stationary position and the ignition is off.
2
Insert the key fob into the ignition or press the start button without pressing the brake pedal to enter the "On" position.
3
Access the vehicle's onboard computer system using the iDrive controller.
4
Navigate to the "Vehicle Information" or "Service" menu.
5
Select "Oil Change" or "Service Required" options.
6
Confirm the reset action when prompted.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Have the key fob ready to access the ignition.

2. Access the Ignition

Insert the key fob into the ignition slot or press the start button without engaging the brake.
Wait for the dashboard lights to illuminate.

Use the iDrive controller to navigate to "Car" or "Vehicle Information."
Select "Service" or "Vehicle Status."

4. Reset the Oil Change Light

Find the "Oil Change" option within the service menu.
Select "Reset" or "Reset Oil Change."
Confirm the reset when prompted by the system.

Press the "Back" button or exit the iDrive menu to return to the main screen.