how to fix the rearview mirror in my BMW 5 Series G30/G31 (2017-2024) that won't adjust?

BMW 5 Series G30/G31 (2017-2024)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

438 words

Problem Statement

The rearview mirror in a BMW 5 Series G30/G31 (2017-2024) is not adjusting properly, which may affect visibility and driving safety.

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems to prevent short circuits or shocks.

Symptoms

•Rearview mirror is stuck in one position
•Manual adjustment mechanism is unresponsive
•Mirror is not adjusting when using the electronic controls (if applicable)
•Possible rattling or movement in the mount
•Check for any associated warning lights on the dashboard

Diagnostic Steps

1
Inspect the rearview mirror assembly for visible damage or obstructions.
2
Check the electrical connections to the mirror if it is electronically controlled.
3
Use a multimeter to test for power at the adjustment switch.
4
Verify the functionality of the adjustment switch by checking for continuity.
5
Assess the mirror's mounting bracket for wear or looseness.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Torx screwdriver
•Multimeter
•Basic hand tools (sockets, wrenches)

Parts Required

•Rearview mirror adjustment motor (if needed)
•Mounting hardware (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the rearview mirror assembly for visible damage or obstructions.
2
Check the electrical connections to the mirror if it is electronically controlled.
3
Use a multimeter to test for power at the adjustment switch.
4
Verify the functionality of the adjustment switch by checking for continuity.
5
Assess the mirror's mounting bracket for wear or looseness.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the vehicle's battery to ensure safety while working with electrical components.

2. Remove the Rearview Mirror

Using a Torx screwdriver, remove the screws or fasteners securing the rearview mirror to the mount.
Gently slide the mirror off the mount, taking care not to damage any connected wiring.

3. Inspect and Repair the Adjustment Mechanism

If the mirror is manually adjustable, check the mechanism for obstructions or debris.
For electronic mirrors, inspect the motor assembly for any signs of wear or failure.
If the motor is faulty, carefully remove it from the assembly, noting the wiring connections.

4. Replace or Repair Components

If the adjustment motor is defective, replace it with a new part.
Reassemble any gears or mechanisms if they were dislodged or damaged.

5. Reinstall the Rearview Mirror

Align the mirror back onto the mount and secure it with the screws.
Reconnect any wiring harnesses to the mirror if applicable.
Reconnect the vehicle's battery.