FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
what causes my BMW 5 Series F10/F11 (2010-2017) to have poor acceleration? - BMW 5 Series
Home/Cars/BMW/5 Series/F10/F11 (2010-2017)/what causes my BMW 5 Series F10/F11 (2010-2017) to have poor acceleration?

what causes my BMW 5 Series F10/F11 (2010-2017) to have poor acceleration?

BMW 5 Series F10/F11 (2010-2017)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
556 words

Problem Statement

The BMW 5 Series F10/F11 (2010-2017) is experiencing poor acceleration, indicating potential issues with the engine performance or drivetrain components.

Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before working on engine components.

Symptoms

  • •Check engine light illuminated
  • •Engine stalling during acceleration
  • •Rough idle
  • •Decreased throttle response
  • •Unusual engine noises during acceleration
  • •Poor fuel economy

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Fuel pressure gauge
  • •Line wrench
  • •Throttle body cleaner
  • •MAF cleaner
  • •Spark plug socket

Parts Required

  • •Air filter
  • •Fuel filter
  • •Spark plugs
  • •Throttle body gasket (if necessary)
  • •Fuel pump (if testing indicates failure)

Additional Information

Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
7 items
Parts Required
5 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the battery to ensure safety while working on electrical components.
2. Address Air Intake Issues
  • Inspect the air filter:

    • Remove the air filter cover using a socket set.
    • Replace the air filter if it is dirty or clogged.
  • Clean the MAF sensor:

    • Disconnect the MAF sensor electrical connector.
    • Remove the MAF sensor from the intake tube.
    • Use MAF cleaner to spray the sensor and let it dry before reinstalling.
3. Fuel System Repair
  • Check fuel pump:

    • Locate the fuel pump access panel or remove the rear seat if necessary.
    • Test fuel pump operation and replace if faulty.
  • Replace fuel filter:

    • Depressurize the fuel system by removing the fuel pump fuse and starting the engine until it stalls.
    • Remove the old fuel filter using a line wrench, and install the new filter according to the flow direction marked on the filter.
4. Throttle Body Maintenance
  • Clean throttle body:

    • Disconnect the throttle body electrical connector.
    • Remove the throttle body from the intake manifold using a socket set.
    • Clean the throttle plate and bore using throttle body cleaner and a soft cloth.
  • Reinstall the throttle body and reconnect the electrical connector.

5. Ignition System Check
  • Replace spark plugs:

    • Remove ignition coils by unscrewing them with a socket set.
    • Use a spark plug socket to remove old spark plugs and install new ones, tightening to manufacturer specifications (usually around 22 ft-lbs).
  • Inspect ignition coils:

    • Check for cracks or signs of wear. Replace any faulty coils.