my BMW 5 Series F10/F11 (2010-2017) shakes when I accelerate what's wrong

BMW 5 Series F10/F11 (2010-2017)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

525 words

Problem Statement

The BMW 5 Series F10/F11 (2010-2017) experiences shaking or vibration during acceleration, indicating potential issues with the drivetrain, suspension, or wheels.

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under a vehicle.
•Disconnect the battery before working on electrical components.

Symptoms

•Vehicle shakes or vibrates during acceleration
•Unusual noise from the engine or drivetrain
•Steering wheel vibration
•Increased vibration at higher speeds
•Potential loss of power during acceleration
•Warning lights may illuminate on the dashboard

Diagnostic Steps

1
Inspect wheel and tire condition for damage or imbalance.
2
Check for proper tire pressure across all tires.
3
Perform a visual inspection of the suspension components for wear or damage.
4
Scan the vehicle’s computer for any diagnostic trouble codes (DTCs).
5
Inspect the driveshaft and CV joints for any signs of wear or damage.
6
Check engine and transmission mounts for signs of deterioration.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Raise the vehicle using a jack and secure it with jack stands.
•Remove each wheel and inspect for any visible damage (cracks, bulges).
•Check tire balance using a tire balancer if available; balance tires as necessary.
•Ensure tire pressures are at the manufacturer-recommended levels and inflate if needed.

Parts Required

•Tires (if damaged)
•Suspension components (if worn)
•Driveshaft or CV joints (if damaged)
•Engine and transmission mounts (if deteriorated)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect wheel and tire condition for damage or imbalance.
2
Check for proper tire pressure across all tires.
3
Perform a visual inspection of the suspension components for wear or damage.
4
Scan the vehicle’s computer for any diagnostic trouble codes (DTCs).
5
Inspect the driveshaft and CV joints for any signs of wear or damage.
6
Check engine and transmission mounts for signs of deterioration.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the battery if working on electrical components.

2. Wheel and Tire Inspection

Tools Required: Jack, jack stands, tire pressure gauge, torque wrench
Raise the vehicle using a jack and secure it with jack stands.
Remove each wheel and inspect for any visible damage (cracks, bulges).
Check tire balance using a tire balancer if available; balance tires as necessary.
Ensure tire pressures are at the manufacturer-recommended levels and inflate if needed.

3. Suspension Inspection

Inspect all suspension components (control arms, bushings, struts) for wear.
Tools Required: Socket set, torque wrench
Tighten any loose bolts to the manufacturer's specifications.
Replace any worn or damaged components.

4. Drivetrain Inspection

Tools Required: Socket set, transmission jack (if needed)
Inspect the driveshaft and CV joints for any signs of damage or excessive play.
If necessary, replace damaged driveshaft or CV joint components.

5. Engine and Transmission Mount Replacement

Tools Required: Socket set, engine hoist (if necessary)
Inspect engine and transmission mounts for cracks or deterioration.
Remove the old mounts and install new mounts, ensuring proper torque settings are followed as specified in the service manual.