how to reset the service light on my BMW 5 Series F10/F11 (2010-2017)

BMW 5 Series F10/F11 (2010-2017)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

391 words

Problem Statement

The service light on a BMW 5 Series F10/F11 (2010-2017) needs to be reset after maintenance or service has been performed.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in "Park" mode (automatic) or neutral (manual) before turning on the ignition.

Symptoms

•Service light illuminated on the dashboard
•Warning message displayed regarding service interval
•Dashboard displays incorrect service interval information

Diagnostic Steps

1
Turn the ignition key to the "ON" position without starting the engine.
2
Check the dashboard for the service light indication.
3
Ensure that all required service has been completed before proceeding with the reset.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for this reset.

Parts Required

•None required for this reset.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools (if any) and ensure the vehicle is in a safe, well-ventilated area.
Have the vehicle key ready.

2. Access the Reset Procedure

Turn the Ignition On
- Insert the key fob into the ignition slot and press the "Start" button without pressing the brake pedal, or turn the key to the "ON" position.
Navigate to the Service Menu
- Use the gas pedal and the brake pedal to navigate.
- Press the gas pedal three times within 10 seconds.

3. Reset the Service Light

Access the Service Menu
- After pressing the pedals, the service menu should appear on the dashboard.
- Use the "BC" button on the turn signal stalk to scroll through the options until you find the service interval you wish to reset.
Reset the Interval
- Once the desired service item is highlighted, press and hold the "BC" button until a confirmation message appears.
- Confirm the reset by selecting “Yes” using the "BC" button again.

4. Turn Off the Ignition

Turn off the ignition and remove the key fob from the ignition slot.