how to reset the oil service light on a BMW 5 Series F10/F11 (2010-2017)

BMW 5 Series F10/F11 (2010-2017)

Error Codes

10 minutes

Time

medium

Difficulty

medium

Severity

2 min read

362 words

Problem Statement

The oil service light on a BMW 5 Series F10/F11 (2010-2017) needs to be reset after an oil change or maintenance service.

Estimated Time

10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park mode before performing the reset to prevent accidental movement.

Symptoms

•Oil service light illuminated on the dashboard
•Inaccurate service interval display
•Reminder for oil change not resetting

Diagnostic Steps

1
Ensure the vehicle is turned off and in park mode.
2
Insert the key fob into the ignition without starting the engine.
3
Press the start/stop button to turn on the ignition (without starting the engine).
4
Check the dashboard for the oil service light and service indicators.
5
Prepare to navigate through the vehicle's menu system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•No special tools required

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is turned off and in park mode.
2
Insert the key fob into the ignition without starting the engine.
3
Press the start/stop button to turn on the ignition (without starting the engine).
4
Check the dashboard for the oil service light and service indicators.
5
Prepare to navigate through the vehicle's menu system.

Solution

1. Preparation

Gather the necessary tools: no special tools are required for this procedure.
Ensure all doors are closed and the vehicle is in a safe environment.

Use the odometer button on the instrument cluster (located near the speedometer).
Press and hold the odometer button until the service menu appears on the dashboard.

3. Reset the Oil Service Light

Once in the service menu, navigate to the "Oil Service" option using the odometer button.
When the "Oil Service" option is highlighted, press and hold the odometer button until the reset option appears.
Confirm the reset by selecting "Yes" using the odometer button.

After confirming the reset, exit the service menu by pressing the odometer button again.
Turn off the ignition.