how to reset the oil light on my BMW 5 Series F10/F11 (2010-2017)

BMW 5 Series F10/F11 (2010-2017)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

396 words

Problem Statement

The oil light on a BMW 5 Series F10/F11 (2010-2017) needs to be reset after an oil change or maintenance service.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in "Park" mode before starting the procedure.

Symptoms

•Oil light remains illuminated on the dashboard
•Engine oil service notification displayed
•Oil change has been performed but the indicator is still active

Diagnostic Steps

1
Ensure the vehicle is in the "Off" position.
2
Insert the key fob into the ignition without starting the engine.
3
Press the "Start/Stop" button once to enter the "On" position (dashboard lights on).
4
Use the gas pedal to navigate through the onboard computer menu.
5
Access the "Service" menu in the iDrive system.
6
Select "Engine Oil" or the relevant service item to reset.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob for ignition access

Parts Required

•None required for resetting the oil light

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the "Off" position.
2
Insert the key fob into the ignition without starting the engine.
3
Press the "Start/Stop" button once to enter the "On" position (dashboard lights on).
4
Use the gas pedal to navigate through the onboard computer menu.
5
Access the "Service" menu in the iDrive system.
6
Select "Engine Oil" or the relevant service item to reset.

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface and in "Park" mode.
Have the key fob ready and ensure the vehicle is off.

2. Access the Ignition

Insert the key fob into the ignition slot.
Press the "Start/Stop" button once to turn on electrical systems without starting the engine.

Press the "Menu" button on the iDrive controller.
Scroll to "Vehicle Info" using the controller.
Select "Service" from the menu options.

4. Reset the Oil Service Light

Locate the "Engine Oil" option in the service menu.
Highlight the "Engine Oil" service item.
Press and hold the controller button until a prompt appears asking for confirmation.
Confirm the reset by selecting "Yes."

Press the "Back" button to exit the service menu.
Turn off the ignition by pressing the "Start/Stop" button.