how to reset the oil change light on my BMW 5 Series F10/F11 (2010-2017)

BMW 5 Series F10/F11 (2010-2017)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

380 words

Problem Statement

The oil change light on a BMW 5 Series F10/F11 (2010-2017) needs to be reset after an oil change has been performed.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in "Park" or "Neutral" before attempting to reset the oil change light.

Symptoms

•Oil change warning light illuminated on the dashboard
•Message indicating "Service Due" or "Oil Change Required"
•Reminder for oil service displayed in iDrive

Diagnostic Steps

1
Ensure the vehicle is in the "OFF" position and all doors are closed.
2
Insert the key fob into the ignition or press the start button without pressing the brake pedal to access the electrical system.
3
Navigate to the iDrive system using the controller.
4
Check for any existing error codes related to service intervals using the BMW diagnostic tool if necessary.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ensure the vehicle is parked on a level surface and the engine is off.

Parts Required

•None required for the reset process

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the "OFF" position and all doors are closed.
2
Insert the key fob into the ignition or press the start button without pressing the brake pedal to access the electrical system.
3
Navigate to the iDrive system using the controller.
4
Check for any existing error codes related to service intervals using the BMW diagnostic tool if necessary.

Solution

1. Preparation

Tools Required: BMW key fob, iDrive controller
Ensure the vehicle is parked on a level surface and the engine is off.

Turn on the ignition without starting the engine (press the start/stop button without pressing the brake).
Use the iDrive controller to navigate to the "Car" menu.
Select "Settings" and then choose "Service Required."

3. Reset the Oil Change Light

In the "Service Required" menu, select "Engine Oil."
Choose "Reset" or "Reset Oil Change Interval" option.
Confirm the reset action when prompted by selecting "Yes."

4. Finalization

Turn off the ignition and remove the key fob.
Wait a moment and then restart the vehicle to verify the oil change light is extinguished.