how to reset my BMW 5 Series F10/F11 (2010-2017) service light after an oil change

BMW 5 Series F10/F11 (2010-2017)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

349 words

Problem Statement

The service light on a BMW 5 Series F10/F11 (2010-2017) requires resetting after an oil change to ensure the maintenance schedule is properly recorded.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in "Park" or "Neutral" with the parking brake engaged before performing the reset.

Symptoms

•Service light illuminated on the dashboard
•Oil change reminder message displayed
•Engine oil warning light may also be present

Diagnostic Steps

1
Ensure the vehicle is in a safe location with the engine off and the key in the ignition.
2
Insert the key fob into the ignition (do not start the engine).
3
Press the start/stop button without pressing the brake pedal to turn on the electrical systems.
4
Navigate to the vehicle's onboard computer using the iDrive controller.
5
Go to "Vehicle Information" and select "Service Required."

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for this reset

Parts Required

•None required for this reset

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in a safe location with the engine off and the key in the ignition.
2
Insert the key fob into the ignition (do not start the engine).
3
Press the start/stop button without pressing the brake pedal to turn on the electrical systems.
4
Navigate to the vehicle's onboard computer using the iDrive controller.
5
Go to "Vehicle Information" and select "Service Required."

Solution

Turn the ignition key to the “ON” position without starting the engine.
Press the “Start/Stop” button once if equipped with keyless ignition.
Use the iDrive controller to navigate to “Vehicle Info” on the display.

2. Reset the Service Light

Select “Service Required.”
Highlight “Engine Oil” or the relevant service item needing reset.
Press and hold the iDrive controller for a few seconds until a prompt appears asking for confirmation to reset.
Confirm the reset by selecting "Yes."

3. Verify the Reset

Return to the main dashboard display.
Check that the service light is no longer illuminated.