how to reset the tire pressure light in BMW 3 Series G20/G21 (2019-2024)

BMW 3 Series G20/G21 (2019-2024)

Error Codes

30 minutes

Time

medium

Difficulty

medium

Severity

2 min read

377 words

Problem Statement

The tire pressure warning light is illuminated in a BMW 3 Series G20/G21 (2019-2024), indicating that the tire pressure monitoring system (TPMS) needs to be reset after checking o

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked on a flat surface while checking tire pressures.

Symptoms

•Tire pressure warning light is illuminated on the dashboard
•Fluctuating tire pressure readings on the display
•Warning message displayed on the iDrive screen
•Possible decrease in handling or performance due to low tire pressure

Diagnostic Steps

1
Check all tire pressures using a tire pressure gauge to ensure they are set to the manufacturer-recommended levels.
2
Confirm that there are no punctures or damage to any tires.
3
Inspect the TPMS sensors for any visible damage or corrosion.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•iDrive controller

Parts Required

•TPMS sensors (if any are malfunctioning)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure all tires are inflated to the recommended pressure (found on the driver’s door jamb).
Have the vehicle in a safe location with the ignition in the "ON" position, but the engine not running.

2. Reset TPMS

Access the iDrive System
- Use the iDrive controller to navigate to the main menu on the display.
- Select "CAR" or "Vehicle Info" depending on your interface version.
Go to Settings
- Navigate to "Settings" or "Vehicle Status."
- Look for "Tire Pressure Monitor" or "TPM."
Reset the System
- Select the "Reset" or "Calibrate" option.
- Confirm the reset when prompted by the system.
Drive the Vehicle
- Drive the vehicle for a short distance (about 10 minutes) at speeds above 20 mph to allow the system to recalibrate.