how to reset the oil service light in BMW 3 Series G20/G21 (2019-2024)

BMW 3 Series G20/G21 (2019-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

399 words

Problem Statement

The oil service light in a BMW 3 Series G20/G21 (2019-2024) needs to be reset after an oil change or service to ensure accurate maintenance tracking.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and secured before performing the reset.

Symptoms

•Oil service light illuminated on the dashboard
•Reminder message for oil service displayed
•No engine performance issues; the focus is solely on the service indicator

Diagnostic Steps

1
Ensure the vehicle is in a stationary position and the engine is turned off.
2
Insert the key fob into the ignition, or press the start button without pressing the brake pedal to power on the electrical systems without starting the engine.
3
Use the iDrive controller to navigate to the “My Vehicle” menu on the infotainment system display.
4
Select “Vehicle Status” followed by “Service Required” to access the service menu.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob or ignition key

Parts Required

•None required for the reset process

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in a stationary position and the engine is turned off.
2
Insert the key fob into the ignition, or press the start button without pressing the brake pedal to power on the electrical systems without starting the engine.
3
Use the iDrive controller to navigate to the “My Vehicle” menu on the infotainment system display.
4
Select “Vehicle Status” followed by “Service Required” to access the service menu.

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface.
Have the key fob ready to access the ignition.

Turn on the ignition without starting the engine (press the start button once).
Use the iDrive controller to select “My Vehicle.”
Navigate to “Vehicle Status.”
Select “Service Required” to open the service menu.

3. Reset the Oil Service Light

In the “Service Required” menu, find the option labeled “Engine Oil” or “Oil Service.”
Select the option and then choose “Reset.”
Confirm the reset when prompted by the system. This may require pressing the controller or confirming via the touchscreen.

4. Verify the Reset

Exit the service menu and return to the main dashboard.
Turn off the ignition completely and then restart the engine.
Check that the oil service light is no longer illuminated.