how to reset the oil light in my BMW 3 Series F30/F31 (2012-2019)?

BMW 3 Series F30/F31 (2012-2019)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

367 words

Problem Statement

The oil light in a BMW 3 Series F30/F31 (2012-2019) needs to be reset after an oil change.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe position to avoid any accidents while performing the reset.

Symptoms

•Oil light illuminated on the dashboard
•Warning message displayed on the instrument cluster
•Engine oil change completed

Diagnostic Steps

1
Ensure the vehicle is parked on a flat surface and the engine is turned off.
2
Insert the key fob into the ignition without starting the engine.
3
Press the start/stop button once without pressing the brake pedal to power on the electronics.
4
Navigate to the "iDrive" menu on the display screen.
5
Select "Vehicle Info" from the menu options.
6
Choose "Vehicle Status" and then "Service Required."

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob

Parts Required

•None required for the reset.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a flat surface and the engine is turned off.
2
Insert the key fob into the ignition without starting the engine.
3
Press the start/stop button once without pressing the brake pedal to power on the electronics.
4
Navigate to the "iDrive" menu on the display screen.
5
Select "Vehicle Info" from the menu options.
6
Choose "Vehicle Status" and then "Service Required."

Solution

1. Preparation

Gather necessary tools: key fob and vehicle owner’s manual (for reference).
Ensure the engine is off and the vehicle is in a safe position.

With the ignition in the ON position (engine off), press the "start/stop" button once.
Wait for the dashboard lights to come on.
Use the iDrive controller to navigate to "Car" on the main menu.

3. Reset the Oil Light

Select "Settings" from the options.
Scroll down to "Service Required" and select it.
Choose "Engine Oil" or the specific option for oil change.
Follow the prompt to reset the oil service light. Confirm any on-screen prompts.

4. Verify Reset

Turn off the ignition and then turn it back on.
Check if the oil light is no longer illuminated on the dashboard.