how to reset the oil change light on my BMW 3 Series F30/F31 (2012-2019)

BMW 3 Series F30/F31 (2012-2019)

Error Codes

5-10 minutes

Time

medium

Difficulty

medium

Severity

2 min read

372 words

Problem Statement

The oil change light on a BMW 3 Series F30/F31 (2012-2019) needs to be reset after an oil change to ensure accurate maintenance reminders.

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in the 'Park' position if automatic or in neutral if manual before performing the reset.

Symptoms

•Oil change light illuminated on the dashboard
•Maintenance reminder message displayed
•Vehicle indicates service is overdue

Diagnostic Steps

1
Ensure the vehicle is in a safe location and the ignition is off.
2
Insert the key fob into the ignition or press the start button without pressing the brake pedal to enter the accessory mode.
3
Observe the dashboard lights and confirm the oil change light is illuminated.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools: None required.
Ensure the vehicle is parked with the ignition in the accessory mode.

Turn on the ignition: Press the start button or turn the key fob to the accessory position without starting the engine.
Press the gas pedal: Fully depress the accelerator pedal three times within five seconds. This activates the service reset menu.

3. Reset the Oil Change Light

Access the reset option: After pressing the gas pedal, the service menu should appear on the dashboard display.
Select the oil change reset: Use the iDrive controller or the buttons on the dashboard to navigate to the oil change reset option.
Confirm the reset: Follow the prompts to confirm the reset. This usually involves selecting "Reset" and then confirming with "Yes."