how to clear the oil service light in my BMW 3 Series F30/F31 (2012-2019)

BMW 3 Series F30/F31 (2012-2019)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

395 words

Problem Statement

The oil service light is illuminated on a BMW 3 Series F30/F31 (2012-2019) and needs to be reset after an oil change.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe position and that the engine is off before performing the reset.

Symptoms

•Oil service light is illuminated on the dashboard
•Notification of oil service due when starting the vehicle
•Engine oil level may be low (if not checked)
•Maintenance reminder message displayed

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is in the OFF position.
2
Turn the ignition key to the ON position without starting the engine.
3
Press the gas pedal fully down three times within 10 seconds.
4
Observe the dashboard for the oil service light; it should begin to blink and then turn off.
5
If the light remains on, repeat the process or check for any underlying service codes.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner (optional)

Parts Required

•None (if only resetting the light)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is in the OFF position.
2
Turn the ignition key to the ON position without starting the engine.
3
Press the gas pedal fully down three times within 10 seconds.
4
Observe the dashboard for the oil service light; it should begin to blink and then turn off.
5
If the light remains on, repeat the process or check for any underlying service codes.

Solution

1. Preparation

Gather necessary tools: OBD-II scanner (optional) for checking codes, if needed.
Ensure the vehicle is parked in a safe location with the engine off.

2. Resetting the Oil Service Light

Turn Ignition On
- Insert the key fob and press the START button without pressing the brake pedal or turn the ignition key to the ON position.
Access the Oil Service Reset Procedure
- Fully depress the gas pedal three times within a span of 10 seconds while the ignition is ON.
Observe the Oil Service Light
- Watch the dashboard; the oil service light should blink and then turn off. If it does, the reset is successful.
Turn Off Ignition
- Turn the ignition back to the OFF position to complete the process.