FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Oil consumption high Audi A6 - Audi A6
Home/Cars/Audi/A6/C7 (2011-2018)/Oil consumption high Audi A6

Oil consumption high Audi A6

Audi A6 C7 (2011-2018)

Error Codes
hard
Difficulty
medium
Severity
Error Code: P0521, P0171
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
584 words

Problem Statement

Learn how to diagnose and repair high oil consumption in Audi A6 C7 models, focusing on PCV system issues and piston ring wear.

Error Code
P0521, P0171
Affected Component
PCV system, piston rings

Symptoms

  • •Frequent need to add oil between oil change intervals
  • •Blue smoke from the exhaust
  • •Oil spots under the vehicle
  • •Decreased engine performance
  • •Warning lights for low oil level

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Compression tester
  • •Leak-down tester
  • •Flashlight
  • •Oil catch pan
  • •Torque wrench
  • •Basic hand tools

Additional Information

Error Code
P0521, P0171
Affected Component
PCV system, piston rings
Difficulty
hard
Severity
medium
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
High Oil Consumption in Audi A6 C7 (2011-2018)

High oil consumption is a common issue in the Audi A6 C7, particularly with the 2.0 TFSI and 3.0 TFSI engines. This problem can be caused by several factors, including piston ring wear, PCV (Positive Crankcase Ventilation) system issues, or oil leaks. Below are detailed steps to diagnose and repair high oil consumption.

Tools Required

  • OBD-II scanner
  • Compression tester
  • Leak-down tester
  • Flashlight
  • Oil catch pan
  • Torque wrench
  • Basic hand tools (socket set, screwdrivers, etc.)

Step 1: Check for Error Codes

  1. Connect OBD-II Scanner: Plug in the scanner to the OBD-II port.
  2. Retrieve Codes: Look for any stored codes related to oil pressure or PCV system (e.g., P0521, P0171).
  3. Note Codes: Document any relevant codes for further investigation.

Step 2: Visual Inspection

  1. Inspect for Oil Leaks: Check around the engine block, oil filter housing, and under the car for oil spots.
  2. Check PCV Valve: Locate the PCV valve on top of the engine. Look for signs of oil leakage or damage.

Step 3: Perform Compression and Leak-Down Tests

  1. Compression Test:
    • Remove spark plugs.
    • Insert the compression tester into each cylinder’s spark plug hole.
    • Disable the fuel system and ignition by removing the fuel pump fuse or relay.
    • Crank the engine and record the pressure reading for each cylinder.
  2. Leak-Down Test:
    • Bring each cylinder to TDC (Top Dead Center) on the compression stroke.
    • Attach the leak-down tester and pressurize the cylinder.
    • Listen for air escaping through the oil cap (piston rings), exhaust (exhaust valves), or intake (intake valves).
Repair Instructions

Step 1: Address PCV System

  1. Replace PCV Valve:
    • Remove the engine cover if necessary.
    • Detach the hose connected to the PCV valve.
    • Remove the old PCV valve and install a new one.
    • Reattach the hose and engine cover.

Step 2: Repair or Replace Piston Rings

  1. Disassemble Engine:
    • Drain the engine oil and coolant.
    • Remove the intake manifold, exhaust manifold, and cylinder head.
    • Remove the oil pan and disconnect the connecting rods to access the pistons.
  2. Replace Piston Rings:
    • Remove pistons from the cylinders.
    • Carefully remove old piston rings and clean piston grooves.
    • Install new piston rings, ensuring correct orientation and ring gap.
    • Reinstall pistons and connecting rods.
  3. Reassemble Engine:
    • Reassemble the engine components in reverse order.
    • Use a torque wrench to tighten bolts to manufacturer specifications.
    • Refill engine oil and coolant.

Step 3: Check for Oil Leaks

  1. Replace Gaskets:
    • Replace any worn gaskets (valve cover, oil pan, etc.) that may contribute to leaks.
  2. Inspect and Replace Seals:
    • Check and replace any damaged seals, such as the front and rear main seals.
Final Steps
  1. Test Drive: After repairs, take the vehicle for a test drive to ensure the issue is resolved.
  2. Monitor Oil Levels: Regularly check oil levels over a few weeks to confirm the problem is fixed.

By following these steps, you should be able to diagnose and significantly reduce or eliminate high oil consumption in your Audi A6 C7.