FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Cooling fan not working Audi A6 C7 - Audi A6
Home/Cars/Audi/A6/C7 (2011-2018)/Cooling fan not working Audi A6 C7

Cooling fan not working Audi A6 C7

Audi A6 C7 (2011-2018)

Error Codes
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
631 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix a non-functional cooling fan in an Audi A6 C7 to prevent engine overheating.

Affected Component
cooling fan

Symptoms

  • •Engine overheating
  • •Air conditioning not cooling effectively
  • •Check engine light may be on
  • •Audible warning from the car's diagnostic system

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Screwdrivers (Phillips and flathead)
  • •Pliers
  • •Socket set
  • •Wiring diagram for Audi A6 C7
  • •Test light

Additional Information

Affected Component
cooling fan
Difficulty
medium
Severity
high
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Cooling Fan Not Working on Audi A6 C7 (2011-2018)

When dealing with a non-functional cooling fan in an Audi A6 C7, it's crucial to address the issue promptly to prevent engine overheating. Below are the steps to diagnose and fix the cooling fan problem.

Tools Required
  • OBD-II scanner
  • Multimeter
  • Screwdrivers (Phillips and flathead)
  • Pliers
  • Socket set
  • Wiring diagram for Audi A6 C7
  • Test light

Step 1: Visual Inspection

  1. Safety First: Ensure the vehicle is turned off, the keys are removed, and the engine is cool.
  2. Check the Fan: Inspect the cooling fan for any visible damage like cracks or debris that might obstruct its movement.
  3. Inspect Wiring and Connectors: Look for any visible signs of wear, corrosion, or disconnection in the wiring harness and connectors leading to the cooling fan.

Step 2: Check Fuses and Relays

  1. Locate Fuse Box: Refer to the vehicle's manual to find the location of the fuse box and identify the fuse related to the cooling fan.
  2. Inspect Fuse: Use a test light or multimeter to check if the fuse is blown. Replace if necessary.
  3. Check Relays: Swap the cooling fan relay with another relay of the same type to see if the fan operates.

Step 3: Use an OBD-II Scanner

  1. Connect Scanner: Plug the OBD-II scanner into the vehicle's diagnostic port.
  2. Read Codes: Check for any diagnostic trouble codes (DTCs) related to the cooling system or fan.
  3. Interpret Codes: Look up any codes in the service manual for further guidance on potential issues.

Step 4: Test the Fan Motor

  1. Direct Power Test: Disconnect the fan connector and apply direct battery power to the fan terminals. If the fan spins, the motor is functional.
  2. Check Voltage: Use a multimeter to measure voltage at the fan connector when the engine is warmed up and the AC is on. It should read around 12 volts. If not, proceed to check the fan control module.

Step 5: Check Fan Control Module

  1. Locate Module: Find the fan control module, typically near the radiator or integrated into the fan shroud.
  2. Inspect the Module: Check for any signs of damage or overheating.
  3. Test Module: Follow the wiring diagram to test the input and output voltages of the control module with a multimeter.
Repair Instructions

Replacing the Cooling Fan or Module

Step 1: Remove the Old Fan

  1. Disconnect Battery: Always disconnect the battery before working on electrical components.
  2. Remove Radiator Cover: Unscrew and remove any covers or panels obstructing access to the fan.
  3. Unplug Connectors: Disconnect the electrical connector to the fan.
  4. Unscrew Fan Assembly: Use a socket set to remove any bolts securing the fan assembly.
  5. Remove Fan: Carefully take out the fan assembly from the engine bay.

Step 2: Install the New Fan or Module

  1. Position New Fan: Place the new fan assembly into the engine bay.
  2. Secure Fan: Bolt the fan assembly securely in place.
  3. Reconnect Connectors: Plug in the electrical connector to the fan.
  4. Reinstall Covers: Replace any covers or panels removed earlier.
  5. Reconnect Battery: Reconnect the battery and start the vehicle to test the fan operation.
Conclusion

After completing the above steps, ensure the cooling fan operates correctly under various conditions. If the problem persists, further investigation may be needed, or consulting with a professional technician might be necessary. Proper maintenance of the cooling system can prevent future issues and prolong engine life.