FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix the P0302 misfire code on my Acura MDX YF3 (2022-Present) - Acura MDX
Home/Cars/Acura/MDX/YF3 (2022-Present)/how to fix the P0302 misfire code on my Acura MDX YF3 (2022-Present)

how to fix the P0302 misfire code on my Acura MDX YF3 (2022-Present)

Acura MDX YF3 (2022-Present)

Error Codes
medium
Difficulty
medium
Severity
Navigation
ProblemSolution
ProblemSolution
3 min read
557 words

Problem Statement

The P0302 code indicates a misfire in cylinder 2 of the Acura MDX YF3 (2022-Present). This can lead to rough engine operation, poor fuel economy, and potential damage to the engi

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Additional Information

Difficulty
medium
Severity
medium

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Symptoms
  • Check Engine Light (CEL) illuminated
  • Rough idle or noticeable vibrations
  • Loss of power during acceleration
  • Increased fuel consumption
  • Engine stalling
Diagnostic Steps

  1. Scan for Error Codes: Use an OBD-II scanner to confirm the P0302 code and check for any additional codes that may indicate related issues.

  2. Visual Inspection:

    • Inspect the engine bay for any obvious signs of damage or disconnected wires, particularly around cylinder 2.
    • Check for vacuum leaks around the intake manifold, which can contribute to misfires.

  3. Check Spark Plug:

    • Remove the spark plug from cylinder 2 and inspect for fouling, wear, or damage.
    • Measure the gap using a feeler gauge to ensure it is within specifications.

  4. Inspect Ignition Coil:

    • Remove the ignition coil from cylinder 2 and inspect it for cracks or damage.
    • Test the ignition coil with a multimeter to ensure it is functioning properly.

  5. Fuel Injector Test:

    • Ensure the fuel injector for cylinder 2 is functioning. You can use a NOID light to check for electrical pulses.
    • Perform a fuel pressure test to ensure adequate fuel delivery.

  6. Compression Test:

    • Conduct a compression test on cylinder 2 to rule out internal engine issues such as a burned valve or piston ring failure.
Repair Instructions

  1. Replace Spark Plug: If the spark plug is fouled or worn beyond specifications, replace it with a new one (check the owner's manual for the correct part number).

    • Tools Required: Socket set, torque wrench, spark plug socket.
    • Time Estimate: 30 minutes.

  2. Replace Ignition Coil: If the ignition coil is faulty, replace it with a new coil.

    • Tools Required: Socket set, torque wrench.
    • Time Estimate: 30-45 minutes.

  3. Clean or Replace Fuel Injector: If the injector is clogged, clean it or replace it if necessary.

    • Tools Required: Fuel injector cleaner, or injector removal tools if replacing.
    • Time Estimate: 1-2 hours depending on accessibility.

  4. Address Compression Issues: If the compression test reveals low compression, further diagnosis is required to determine if the head gasket, piston rings, or valves need repair.

    • Tools Required: Compression tester.
    • Time Estimate: 1-2 hours for diagnosis; repair time varies based on the issue.
Safety Warnings
  • Always disconnect the negative battery terminal before performing electrical repairs to avoid shock or short circuits.
  • Allow the engine to cool down before working on components to prevent burns.